Universal Compact Base Plate

Es ist eine gute Platte um den Virpil mit mehr Basen compatible zu machen.
Wie bei den meisten Stick-Halterungen, muss es aber passen. Es ist nicht wirklich universell.
Die Löcher zum Befestigen sind von Links nach Rechts ca 10,5 bis 11 cm von einander entfernt. Und von Vorne nach Hinten sind es ca 11 cm.
Es wäre gut, wenn Virpil noch eine Skizze hinzufügt, damit man als Kunde ausmessen kann, ob man die Platte auch nutzen kann. Man braucht mindestens 2 Schrauben um die Platte zu fixieren.

It's a good plate to put the Stick on holder that the stick doesn't fit naturally. Like with all other plates it has to fit. It's sadly not really universal.
The holes from right to left are around 10.5 cm to 11 cm afar and from front to back around 11 cm.
It would be good that Virpil adds a sketch with the distances so customers can measure if it can give some stability. You need at least 2 holes that you can screw to fix it.

Nice solid bases, backlog is quite high right now

Satisfactory, nothing to add, it does the job

Es fuerte, robusto y justo para mi base virpil paea mi joystick. Es fantastico!!

Very satisfaite of my ordre thank you very much

straight forward, screw it in the base. and the exterior hole will go in every desk mount and adapter i have seen. higly recommanded to buy one with your base.

The adaptor plate was purchased so my CM2 base wold fit on my Warthog Desk Mount (Monstertech). The base plate of the base unit needs to be replaced with the adapter plate using the 4 countersunk screws provided but is not supplied with any screws to fit onto whatever base you use. I had some M3 allen bolts and nuts luckily and these needed to be fed through from the top (so do this before screwing to the stick base) and secured with nuts that were small enough to fit in the countersunk wells giving a flush fit with my existing joystick stand. Ideally, you will want appropriately sized washers too. The mounting plate fits exactly with no movememt or play although there is a slight overhang as the adaptor plate has slightly different dimensions. Just would have been better is it has come with some fixings for this but the solution would be a few pence at the hardware store or raid the mechano set. Stick is mounted and looks awesome. You will kick yourself if you forget to order this and you have existing mounts,

The adapter plate works flawlessly with the S-Warthog mount solution by Wheel Stand Pro. The screws that the plate comes with are M4-.7 metric screws. They however do not come with M4-.7 nuts which can be purchased on Amazon here in the U.S. These nuts will be needed to bolt down the adapter plate to the optional pole plate of the s-warthog stand. This plate allowed me to use my MT50CM2 base with the s-warthog stand.